Microbiology

Product

UV sterilization function and timing function can be set by appointment.
Motorized front window, control limit and travel limit double protection,ergonomic 10° tilt Angle, improve the operation comfort.
With memory function in case of power-failure.
Work area surrounded by negative pressure, prevent leakage,improve Biosafety.
Audio and visual alarm (Abnormal airflow velocity, HEPA filter failure, UV lamp failure, Front window at unsafe height).
Interlock function: UV lamp and front window; UV lamp and blower, LED lamp; blower and front window.
Foot switch: adjust front window height, to avoid airflow turbulence caused by arm movement.

Ergonomic Control Panel Location, centered and angled down for an easy reach & viewing.
Brushed stainless steel work surface is for easy cleaning.
The non-direct light source design can effectively relieve the operator’s visual fatigue under the condition of ensuring the illumination.
Intuitive and easy-to-use microprocessor controller with LCD display, graphical and digital display of the operating status of each function, such as filter life, UV life etc.
Front sliding sash interlock with fan and UV lamp.
UV sterilization with UV lamp timing function.
Front sash and side windows are made of UV-resistant tempered glass.
The host and sockets have independent capacitors to prevent current overload.

PID Intelligent with touch button setting.
Ergonomic design panel for easy operation.
Inner glass door equipped. Double door structure with high-quality glass for easy sample observation, magnetic strip for easy opening and closing, good sealing, and open door power-off function.
Capacity : 45L, 65L, 125L, 210L, 45L, 65L, 125L, 210L

Gentle braking at low speeds with efficient separation acceleration and braking time(20-80 seconds) can be
adjustable for the 0-5000rpm speed
The LCD display with ability to change between RPM andRCF
Separate short spin button for convenient and quick spins
Automatic release the lid when operation has stopped to save processing time
Operation can be timed from 10 seconds t0 99 minutes with bell signal after finish operation
Safety lid-lock prevent opening the centrifuge lid until the rotor has stopped spinning

Temperature control range: -20~+40 C.
The temperature can be maintained at -4 C /+4 C at the highest speed.
The pre-cooling function can be quick cooling the samples.
The setting temperature can be maintained continuously when centrifugal function is not used and the door cover is closed.
It has automatic standby function, optimizes the refrigeration effect and prolongs the service life of the compressor.

The plate with white ceramic with excellent corrosion resistance and keep it safety.
The special electrical insulation composite material provide the excellent heating performance and the surface of hot plate can reach temperature up to 380°C.
Advanced microprocessor controls allowquick, precise adjustment of speed and temperature.
The integration timer which for monitoring the sensitive chemical reaction.
LED display which can be show the setting temperature and actual temperature.
DC brushless motor makes stable operation, low noise, long using life and no spark.
HOT warning prompted to avoid scalding.
Use the large Alnico material which can be provide the powerful magnetic force, it can be prevented the high temperature and stir bar decoupling.

Dual-hold electromagnetic locks ensure automatic locking under high temperature or pressure.
Full automatic water replenishment, built-in current detection module to monitor the operation status of the heater in real-time, preventing dry heating online.
Sterilization Temperature : 105~135 ℃
Max.Working Temperature : 135℃
Capacity : 56L / 80L / 75L / 105L / 120L / 95L / 135L / 150L

Features a mirror stainless steel mouth that maintains its color even after long-term use.
Equipped with an imported double insulated ceramic liner, ensuring stable performance.
Furnace is constructed with a vacuum-formed polycrystalline mullite fiber material, providing high-efficiency insulation.
The double-shell design incorporates an insulated air sleeve and double guiding air passage for enhanced thermal insulation.
It utilizes a high-precision micro-computer controller and precision sensor, resulting in accurate temperature control.
Range 100-1200℃
Capacity : 2L, 7L, 12L, 16L

Optical System Finite optical system, 160mm
Observation Tube Binocular head Siedentopf type
Objectives 4X/0.10 (WD 17mm), 10X/0.25 (WD 6.4mm) 40X/0.65/S (WD 0.45mm), 100X/1.25/S (WD 0.14mm)
Fine focus precision 2µm minimum increment
Z-axis movement 13mm
Diopter adjustment On left tube , +/- 5 diopter

High Quality Magnification:IUL’s DOT Colony Counter has a large 120 mm diameter lens with a DINx2 magnification power.
Pointer Technology:Colonies are counted by directly touching these with a pointer or by marking them on the Petri dish with a felt tip pen.
Adaptable for any plate:Multiple adapters are available: 60 mm, 70 mm, 80 mm, 90 mm,100 mm, 120 mm, and 150 mm.
Import colony counts to PC applications using a USB:Colony counts can be sent to PC applications such as a spreadsheet. Results are sent as standard PC keyboard keystrokes.
Scalable lighting intensities:Bottom light, 4 selectable intensities, On/Off switching powered from the instrument. Upper light (depending of the glass magnifier ordered), On/Off switching powered from the instrument.

Large central pipetting button and separate ejection function
True one-handed operation for both right-and left-handers
Completely autoclavable at 121℃ ( 20 min ) volume-change protection
4-Position volume display , always clearly visible Easy Calibration technique- readjustment without Special tools
Changes from factory settings are clearly visible extemally
Color-coded for easy selection of the right tip CE-compliant
High chemical and UV resistance
Ready volume 0.1μl – 1.000μl